cMoyBB DIY Kit, Rechargeable
DIY Kits
$42.00
In Stock
Kit containing all components to electrically assemble a cMoyBB v2.03R: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.
Overview
This kit contains all components required to electrically assemble a rechargeable cMoyBB v2.03R: all standard resistors, capacitors, jacks, connectors, ICs, and circuit board. No battery, knob, or enclosure. Soldering required.
The cMoyBB makes a great first time soldering project. We recommend that you review the DIY guide to gather a full understanding of assembly requirements and possible modifications. You may also experiment with component choices at cmoybb.jdslabs.com
NOTE: We are currently shipping a standard DIP socket in all cMoyBB kits, rather than the pictured, gold plated socket. Performance is equal and the original part is currently on backorder.
Packaged Items
- R2_L, R2_R: Xicon 100k, 1/8W
- R3_L, R3_R: Xicon 2.05k, 1/8W
- R4_L, R4_R: Xicon 10.2k, 1/8W
- RB_L, RB_R, R7, R8: Xicon 24k, 1/8W
- C1: Nichicon 330uF, 35V
- C2_L, C2_R: 2.2uF Film
- C3+, C3-, C4: Kemet C320C104K5R5TA
- CB_L, CB_R: WIMA 0.068uF
- D1: 5mm Blue LED
- [D1]: 5mm LED Grommet
- U1: 8pin DIP socket
- U2: Texas Instruments TLE2426CLP
- [U1]: NJR4556
- J5: CUI PJ-040D DC Jack
- J4: Alps RK0971221Z05, 10k Potentiometer
- J3: C&K 0S202011MS2QS1, Toggle Switch
- J2: Kycon STX-3100-9C, 3.5mm Jack
- J1: Kycon STX-3100-3C, 3.5mm Jack
- V+, V-: Premium 9V Battery connector
- D2: 3mm Red LED
- D3, D4, D5: 1N4001 Diodes
- R1: 47Ω - 1/8W metal film resistor
- U4: Linear Regulator, LM317
- Assembly Guide
- Bill of Materials
- Enclosure Cutout Pattern
- cMoyBB Instructions Guide
- cMoyBB Frequency Response Tool
Instructions & Guides
Related Products
